Product Specifications / Features
Die Steel, Mould Steel, Special Steel, Alloy Steel Bars
C : 0.65-0.75
Si : 0.10-0.50
P : Max 0.030
S : Max 0.030
Mo: Max 0.50
Good toughness at lower hardness lever.
Good wear at high hardness lever.
L6 was designed for general purpose tools where greater
toughness is required, such as forming rolls, punches,
blanking dies, shear blades,and spindles.
L6 has a machinability rating of 85% of a 1% carbon tool
L6 should be annealed at 1400°F and held for one hour per
inch of thickness. Cool at 20°F per hour to 900°F and then
air-cool. A maximum hardness of 217 Brinell should be
L6 should be preheated to 1200°F then heated to 1500°to
1550°F and held for one hour per inch of thickness. Quench
in oil to 150°F followed immediately by tempering. L6 can
also be air quenched in sections less than 1" thick.
Well and High Quality Control ,
Prompt Delivery ,
New Product ,
Customer's Design and Logo are Welcome ,
Competitive Prices ,
In a Variety of Design ,
Small Order Acceptable